> A track is essentially a route that is made up of many linked sequential locations which a handheld GPS unit automatically creates and saves as you hike in the wilderness. This is analogous with leaving markers along a trail, so you can retrace your path that your came in on while hiking in the wilderness. This helps the hiker avoid getting lost while enjoying and exploring in the wilderness.

Waypoints, routes, and tracks are the three principal categories of locations that are fixed by a hiker in a handheld GPS unit. An understanding of these three basic categories gives the hiker insight into how a handhe

Handheld GPS units are a hikers best friend. Any hiker knows that being able to find your way around, especially in wilderness areas, is important. Hikers also know two of the deterrents to hiking in the wilderness are how to find the head trail and then how not to get lost during the hike. A handheld GPS unit can give people the freedom to explore the experience hiking in the wilderness areas that they have not attempted before.

A typical handheld GPS unit is powered by standard batteries and is 2 to 3 inches wide and 4 to 6 inches long. These handheld GPS units have a small screen which shows an icon representing your current location and pre-plotted locations. Various models also have maps showing roads and streams, topography, etc.

Handheld GPS units which can be used for hiking in the wilderness, use satellites orbiting over 12,000 miles above the earth to determine the position of the handheld GPS unit on the ground. It does this by using travel times to the handheld GPS unit's signals being emitted from some of the 24 Navstar satellites. Consumer grade handheld GPS units need to receive signals from at least three of these satellites to calculate your "XY" or map coordinated position. At least four of these satellites are needed to also calculate your altitude.

There are several physical elements which may prevent a handheld GPS unit from receiving a satellittes signals. Mountains, canyon walls, high metropolitan buildings, and dense forest growth can limit the number of low in the sky satellites that are visible and therefore useable by the handheld GPS unit.

Once a handheld GPS unit has a location fixed in it, here's what it may do for you while you are hiking in the wilderness.

1. Waypoints: A waypoint is a single point location. It can be saved in the handheld GPS unit's memory. As you are hiking in the wilderness you can see your current position in relation to the point you want to go to. Waypoints may be created and saved in the handheld GPS unit's memory before leaving for your trip or while you are in the field exploring. Sometimes a series of waypoints are sequentially linked to form a route.

2. Routes: A route is a series of locations that are linked in sequence to describe a path along which you intend to hike in the wilderness. The maximum number of positions that can go into a route varies depending on the type and model handheld GPS unit you have.

3. Tracks: A track is essentially a route that is made up of many linked sequential locations which a handheld GPS unit automatically creates and saves as you hike in the wilderness. This is analogous with leaving markers along a trail, so you can retrace your path that your came in on while hiking in the wilderness. This helps the hiker avoid getting lost while enjoying and exploring in the wilderness.

Waypoints, routes, and tracks are the three principal categories of locations that are fixed by a hiker in a handheld GPS unit. An understanding of these three basic categories gives the hiker insight into how a handhel

resenting your current location and pre-plotted locations. Various models also have maps showing roads and streams, topography, etc.

Handheld GPS units which can be used for hiking in the wilderness, use satellites orbiting over 12,000 miles above the earth to determine the position of the handheld GPS unit on the ground. It does this by using travel times to the handheld GPS unit's signals being emitted from some of the 24 Navstar satellites. Consumer grade handheld GPS units need to receive signals from at least three of these satellites to calculate your "XY" or map coordinated position. At least four of these satellites are needed to also calculate your altitude.

There are several physical elements which may prevent a handheld GPS unit from receiving a satellittes signals. Mountains, canyon walls, high metropolitan buildings, and dense forest growth can limit the number of low in the sky satellites that are visible and therefore useable by the handheld GPS unit.

Once a handheld GPS unit has a location fixed in it, here's what it may do for you while you are hiking in the wilderness.

1. Waypoints: A waypoint is a single point location. It can be saved in the handheld GPS unit's memory. As you are hiking in the wilderness you can see your current position in relation to the point you want to go to. Waypoints may be created and saved in the handheld GPS unit's memory before leaving for your trip or while you are in the field exploring. Sometimes a series of waypoints are sequentially linked to form a route.

2. Routes: A route is a series of locations that are linked in sequence to describe a path along which you intend to hike in the wilderness. The maximum number of positions that can go into a route varies depending on the type and model handheld GPS unit you have.

3. Tracks: A track is essentially a route that is made up of many linked sequential locations which a handheld GPS unit automatically creates and saves as you hike in the wilderness. This is analogous with leaving markers along a trail, so you can retrace your path that your came in on while hiking in the wilderness. This helps the hiker avoid getting lost while enjoying and exploring in the wilderness.

Waypoints, routes, and tracks are the three principal categories of locations that are fixed by a hiker in a handheld GPS unit. An understanding of these three basic categories gives the hiker insight into how a handhe

hese satellites are needed to also calculate your altitude.

There are several physical elements which may prevent a handheld GPS unit from receiving a satellittes signals. Mountains, canyon walls, high metropolitan buildings, and dense forest growth can limit the number of low in the sky satellites that are visible and therefore useable by the handheld GPS unit.

Once a handheld GPS unit has a location fixed in it, here's what it may do for you while you are hiking in the wilderness.

1. Waypoints: A waypoint is a single point location. It can be saved in the handheld GPS unit's memory. As you are hiking in the wilderness you can see your current position in relation to the point you want to go to. Waypoints may be created and saved in the handheld GPS unit's memory before leaving for your trip or while you are in the field exploring. Sometimes a series of waypoints are sequentially linked to form a route.

2. Routes: A route is a series of locations that are linked in sequence to describe a path along which you intend to hike in the wilderness. The maximum number of positions that can go into a route varies depending on the type and model handheld GPS unit you have.

3. Tracks: A track is essentially a route that is made up of many linked sequential locations which a handheld GPS unit automatically creates and saves as you hike in the wilderness. This is analogous with leaving markers along a trail, so you can retrace your path that your came in on while hiking in the wilderness. This helps the hiker avoid getting lost while enjoying and exploring in the wilderness.

Waypoints, routes, and tracks are the three principal categories of locations that are fixed by a hiker in a handheld GPS unit. An understanding of these three basic categories gives the hiker insight into how a handhe

u are hiking in the wilderness you can see your current position in relation to the point you want to go to. Waypoints may be created and saved in the handheld GPS unit's memory before leaving for your trip or while you are in the field exploring. Sometimes a series of waypoints are sequentially linked to form a route.

2. Routes: A route is a series of locations that are linked in sequence to describe a path along which you intend to hike in the wilderness. The maximum number of positions that can go into a route varies depending on the type and model handheld GPS unit you have.

3. Tracks: A track is essentially a route that is made up of many linked sequential locations which a handheld GPS unit automatically creates and saves as you hike in the wilderness. This is analogous with leaving markers along a trail, so you can retrace your path that your came in on while hiking in the wilderness. This helps the hiker avoid getting lost while enjoying and exploring in the wilderness.

Waypoints, routes, and tracks are the three principal categories of locations that are fixed by a hiker in a handheld GPS unit. An understanding of these three basic categories gives the hiker insight into how a handhe

> A track is essentially a route that is made up of many linked sequential locations which a handheld GPS unit automatically creates and saves as you hike in the wilderness. This is analogous with leaving markers along a trail, so you can retrace your path that your came in on while hiking in the wilderness. This helps the hiker avoid getting lost while enjoying and exploring in the wilderness.

Waypoints, routes, and tracks are the three principal categories of locations that are fixed by a hiker in a handheld GPS unit. An understanding of these three basic categories gives the hiker insight into how a handheld GPS unit can help one navigate and explore safely while hiking in the wilderness. It can be used to preplan trips and to guide the hiker along their from their start to the destination and back again. A handheld GPS unit is ideal for the hiker to track and show them where they are going, where they have been and to reverse the course and return the hiker safely to their starting point.