ctricity. GFCIs should be used any time there is a source of electricity or electric outlet near a source of water, both on construction sites and in and around the home.

There are also a number of things you should avoid in order to increase electric-related safety around the construction site. First, don’t let water collect on the floor while you’re working with electric equipment and lines. Remove water before it can accumulate. Water and electricity do not mix! Next, avoid stringing along electrical wires and lines over floors. This is a safety haz

Most electric-related accidents and injuries occur as a result of water existing in and around the construction site where electrical equipment and lines are being used and worked on. One of the biggest things you can do to reduce electric shock and electrical injury is to work to prevent water from coming into contact with electrical equipment and lines.

Constructions workers should, in general, exercise extreme caution at all times when working with any and all types of electrical equipment, such as panels, light fixtures, alarm systems, computers, transformers, conduit, and junction boxes, among others—particularly when near sources of water. Construction workers should also take the time to familiarize themselves with the construction site and all pieces of electrical equipment and spot any potential electric hazards in the site before they get to work, as well as to identify any electrical equipment that could become damaged through the use of various wet methods of removal.

It’s also important to “de-energize” all electrical equipment as much as it can be feasibly done. Use non-electrical alternatives wherever you can. For example, use portable floodlight systems for lighting, and use vacuum attachments and scrapers made out of plastic, rubber, or wood instead of metal or other conductive materials. When working with electricity, maintain construction safety by wearing protective gear, which in this case includes insulated rubber boots and insulated rubber gloves.

There are a few more precautions that construction teams should implement with respect to electrical construction safety. All live power line and cables should be covered with hot line covers, and all electrical outlets must be sealed tightly. Ensure all wiring, lines, extension cords, outlets, plus, and power pickups contain a Ground Fault Circuit Interrupter.

A Ground Fault Circuit Interrupter, or GFCI, are outlets containing a “test” and “reset” buttons that prevent electric shock and electrocution by monitoring the flow of electricity, or current, through the circuit of the outlet. If the electric current changes in any way (for example, if a cord comes into contact with water), the GFCI immediately shuts off the flow of electricity. GFCIs should be used any time there is a source of electricity or electric outlet near a source of water, both on construction sites and in and around the home.

There are also a number of things you should avoid in order to increase electric-related safety around the construction site. First, don’t let water collect on the floor while you’re working with electric equipment and lines. Remove water before it can accumulate. Water and electricity do not mix! Next, avoid stringing along electrical wires and lines over floors. This is a safety haza

ransformers, conduit, and junction boxes, among others—particularly when near sources of water. Construction workers should also take the time to familiarize themselves with the construction site and all pieces of electrical equipment and spot any potential electric hazards in the site before they get to work, as well as to identify any electrical equipment that could become damaged through the use of various wet methods of removal.

It’s also important to “de-energize” all electrical equipment as much as it can be feasibly done. Use non-electrical alternatives wherever you can. For example, use portable floodlight systems for lighting, and use vacuum attachments and scrapers made out of plastic, rubber, or wood instead of metal or other conductive materials. When working with electricity, maintain construction safety by wearing protective gear, which in this case includes insulated rubber boots and insulated rubber gloves.

There are a few more precautions that construction teams should implement with respect to electrical construction safety. All live power line and cables should be covered with hot line covers, and all electrical outlets must be sealed tightly. Ensure all wiring, lines, extension cords, outlets, plus, and power pickups contain a Ground Fault Circuit Interrupter.

A Ground Fault Circuit Interrupter, or GFCI, are outlets containing a “test” and “reset” buttons that prevent electric shock and electrocution by monitoring the flow of electricity, or current, through the circuit of the outlet. If the electric current changes in any way (for example, if a cord comes into contact with water), the GFCI immediately shuts off the flow of electricity. GFCIs should be used any time there is a source of electricity or electric outlet near a source of water, both on construction sites and in and around the home.

There are also a number of things you should avoid in order to increase electric-related safety around the construction site. First, don’t let water collect on the floor while you’re working with electric equipment and lines. Remove water before it can accumulate. Water and electricity do not mix! Next, avoid stringing along electrical wires and lines over floors. This is a safety haz

rnatives wherever you can. For example, use portable floodlight systems for lighting, and use vacuum attachments and scrapers made out of plastic, rubber, or wood instead of metal or other conductive materials. When working with electricity, maintain construction safety by wearing protective gear, which in this case includes insulated rubber boots and insulated rubber gloves.

There are a few more precautions that construction teams should implement with respect to electrical construction safety. All live power line and cables should be covered with hot line covers, and all electrical outlets must be sealed tightly. Ensure all wiring, lines, extension cords, outlets, plus, and power pickups contain a Ground Fault Circuit Interrupter.

A Ground Fault Circuit Interrupter, or GFCI, are outlets containing a “test” and “reset” buttons that prevent electric shock and electrocution by monitoring the flow of electricity, or current, through the circuit of the outlet. If the electric current changes in any way (for example, if a cord comes into contact with water), the GFCI immediately shuts off the flow of electricity. GFCIs should be used any time there is a source of electricity or electric outlet near a source of water, both on construction sites and in and around the home.

There are also a number of things you should avoid in order to increase electric-related safety around the construction site. First, don’t let water collect on the floor while you’re working with electric equipment and lines. Remove water before it can accumulate. Water and electricity do not mix! Next, avoid stringing along electrical wires and lines over floors. This is a safety haz

line covers, and all electrical outlets must be sealed tightly. Ensure all wiring, lines, extension cords, outlets, plus, and power pickups contain a Ground Fault Circuit Interrupter.

A Ground Fault Circuit Interrupter, or GFCI, are outlets containing a “test” and “reset” buttons that prevent electric shock and electrocution by monitoring the flow of electricity, or current, through the circuit of the outlet. If the electric current changes in any way (for example, if a cord comes into contact with water), the GFCI immediately shuts off the flow of electricity. GFCIs should be used any time there is a source of electricity or electric outlet near a source of water, both on construction sites and in and around the home.

There are also a number of things you should avoid in order to increase electric-related safety around the construction site. First, don’t let water collect on the floor while you’re working with electric equipment and lines. Remove water before it can accumulate. Water and electricity do not mix! Next, avoid stringing along electrical wires and lines over floors. This is a safety haz

ctricity. GFCIs should be used any time there is a source of electricity or electric outlet near a source of water, both on construction sites and in and around the home.

There are also a number of things you should avoid in order to increase electric-related safety around the construction site. First, don’t let water collect on the floor while you’re working with electric equipment and lines. Remove water before it can accumulate. Water and electricity do not mix! Next, avoid stringing along electrical wires and lines over floors. This is a safety hazard and must be avoided. Finally, be careful not to damage insulated covers and protectors.

Finally, in order to increase construction safety around electricity, construction workers and team members should always assume that any piece of electrical equipment or any lines (wiring, etc.) in and around the site are “live,” or energized, unless otherwise tested and publicly noted.

If any of your electrical equipment that you regularly use on construction sites comes with any safety manuals, be sure to read them through thoroughly before operating them. General electrical safety may also be explained in safety manuals.